- Unverferth
- Bulk Handling
- Grain Handling
- Grain Boxes & Wagons
- Grain Carts
- Running Gears
- Hay Handling
- Header Transports
- Primary Tillage
- Seedbed Tillage
- Seed Tenders
- Wheel Products
- Brent
- Grain Handling
- Primary Tillage
- Better-Bilt
- Freedom
- Landscape Tools
- Minuteman
- Skid-Steer Attachments
Dealer Locator
Tremor® Subsoiler - Brent Primary Tillage
"Create an Aftershock in Your Hardpan"
click image to enlarge
Product Overview
The Tremor®subsoiler from Brent is designed to be tough and aggressive. Its parabolic auto-reset shanks, with 6,000 pounds of trip pressure and a working depth of 24 inches, are built to rip through the heaviest compaction and shatter hardpan. Shear-bolt protected shanks, with 7,500 pounds of shear pressure, are also available.
Feature Overview
- Parabolic-shaped shanks for maximum soil disturbance
- Welded, heavy-duty, double frame with 6"x 6" rear bar for increased strength and durability
- Units factory assembled for 30" spacing, and an innovative frame design with bolt-on frame extension allows the customer to vary shank spacing from 20" to 40"
- Gauge wheels with new 7.6Lx15-8 ply tires standard on rigid units, and 9.5Lx15-8 ply tires standard on folding models
- Swivel coulter with 20" rippled blade cuts residue ahead of shank for optimum trash flow and features 1,500 lbs. of blade down pressure for optimum penetration
- Auto-reset shank design allows shank to trip rearward and upward without use of shear bolts providing 6,000 lbs. of pressure per shank for consistent working depth
Specifications Overview
| Model Size | Appx. H.P. Range* | Transport Width | Approx. Weight (lbs.) | |
| Shear-Bolt Shank | Auto-Reset Shank | |||
| 9 shank (folding wings) | 270-360 | 16' 5" | 5600 | 5900 |
| 8 shank | 240-320 | 21' 10" | 5100 | 5400 |
| 7 shank | 210-280 | 19' | 3838 | 4063 |
| 6 shank | 180-240 | 17' | 3839 | 3581 |
Accessories Overview
- Rolling Finisher with spiraled, straight blades can be added to 4-8 shank models for additional finishing and thorough leveling of soil
- Shank Stagger Kit can be added for reducing horsepower requirements and increasing residue flow. Kits available to position shank 12" or 16" rearward
- Chromium-capped points and wing points are available
- Covering boards are available for additional soil and trash mixing
Product Features
- Parabolic-shaped shanks for maximum soil disturbance
- Welded, heavy-duty, double frame with 6"x 6" rear bar for increased strength and durability
- Units factory assembled for 30" spacing, and an innovative frame design with bolt-on frame extension allows the customer to vary shank spacing from 20" to 40"
- Gauge wheels with new 7.6Lx15-8 ply tires standard on rigid units, and 9.5Lx15-8 ply tires standard on folding models
- Swivel coulter with 20" rippled blade cuts residue ahead of shank for optimum trash flow and features 1,500 lbs. of blade down pressure for optimum penetration
- Auto-reset shank design allows shank to trip rearward and upward without use of shear bolts providing 6,000 lbs. of pressure per shank for consistent working depth
- Economical, shear-bolt, protected shanks available with 7,500 lbs. of shear pressure
- Up to 24" working depth for shattering the deepest compaction
- 1 1/4" wide, high-stress, steel shanks with triangular-shaped forged wear bars for longer life
- Replaceable 2 1/2" wide x 12" long forged points
- Choice of tractor red or green high-quality powder-coat finish
- 35" underframe clearance for handling residue
Product Specifications
| Model Size | Appx. H.P. Range* | Transport Width | Approx. Weight (lbs.) | |
| Shear-Bolt Shank | Auto-Reset Shank | |||
|
*H.P. range determined from 14-inch working depth at 4 m.p.h. Due to continuing improvements in the design and manufacture of Unverferth products, all specifications contained herein are subject to change without notice. |
||||
| 9 shank (folding wings) | 270-360 | 16' 5" | 5600 | 5900 |
| 8 shank | 240-320 | 21' 10" | 5100 | 5400 |
| 7 shank | 210-280 | 19' | 3838 | 4063 |
| 6 shank | 180-240 | 17' | 3839 | 3581 |
| 5 shank | 150-200 | 14' 4" | 2883 | 3043 |
| 4 shank | 120-160 | 11' 10" | 2488 | 2616 |
| 3 shank | 90-120 | 10' | 2107 | 2193 |
Product Accessories
- Rolling Finisher with spiraled, straight blades can be added to 4-8 shank models for additional finishing and thorough leveling of soil
- Shank Stagger Kit can be added for reducing horsepower requirements and increasing residue flow. Kits available to position shank 12" or 16" rearward
- Chromium-capped points and wing points are available
- Covering boards are available for additional soil and trash mixing
- Transport light kits for safer road travel
- 3-Pt. Implement Caddy fits up to 9-shank folding models allowing for easy conversion from a 3-point unit into a pull-type implement
- Pull-Type Conversion packages to fit 4-8 shank rigid machines allow bolt-on conversion from a 3-point unit into a pull-type implement
