- Unverferth
- Bulk Handling
- Grain Handling
- Grain Boxes & Wagons
- Grain Carts
- Running Gears
- Hay Handling
- Header Transports
- Primary Tillage
- Seedbed Tillage
- Seed Tenders
- Wheel Products
- Brent
- Grain Handling
- Primary Tillage
- Better-Bilt
- Freedom
- Landscape Tools
- Minuteman
- Skid-Steer Attachments
Dealer Locator
Truck-Mounted Augers - Unverferth Bulk Handling
"Easily Maneuvers into Place for Fast Unloading"
click image to enlarge
Product Overview
Speed up the handling of all your bulk materials by equipping your truck with the versatile truck unloading auger from Unverferth. It mounts easily on your truckbed gate and makes unloading of seed, feed and fertilizer virtually effortless.
Feature Overview
- Telescopic downspout and side-to-side maneuverability of the auger let you unload to the rear or either side of the truck
- Extendible downspout from 9' to 14'9" and a 360-degree rotating elbow provide for a full 25-foot reach
- Weather-resistant electronic switch at the end of the spout, combined with a metering door between the truck and hopper, put you in control of the flow rate
Product Features
- Telescopic downspout and side-to-side maneuverability of the auger let you unload to the rear or either side of the truck
- Extendible downspout from 9' to 14'9" and a 360-degree rotating elbow provide for a full 25-foot reach
- Weather-resistant electronic switch at the end of the spout, combined with a metering door between the truck and hopper, put you in control of the flow rate
- Constructed of heavy-duty, 10-guage steel for greater durability
- Powered by 4-cubic-inch hydraulic motor that requires just 6 gallons per minute and 1,200 P.S.I. of pressure
- The top-mounted motor keeps clear of dust and debris for longer life
- Easily lowers into unloading position with the use of a winch and locks into position with tool-free over-center latch
- Auger assembly easily folds into a compact transport position
- Tool-free detachment from truck with the removal of two pins and the cable
- All metal parts of auger are powder-coated for optimum corrosion resistance
- Rubber hopper guard minimizes material bounce and spill
- Choice of steel or brush-tip flighting
- Discharge rate of 500 bu./hr. for grains and 900 lbs. /min for fertilizer based on 500 rpm auger speed
